4Pcs Fuel Injector SE500826 RE48786 RE44508 29279 for Stanadyne John Deere Tractor
This fuel injector is engineered as a direct replacement for the Stanadyne John Deere Tractor. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| John Deere Engine: 4045, 4045T, 4.5L Powertech M, 3029, 3029T, 3029D Applications:Fit for following models | See product specifications |
| John Deere Excavator: 110, 120, 160LC, 200LC, 230LC, 230LCR, 230LCRD, 270LC, 690ELC | See product specifications |
| John Deere Loader:2254,310E, 310G, 310J W, 310J W, 310SE, 310SG, 310SJ W, 310SJ W, 315SE, 315SG, 315SJ, 324H, 344H, 344J, 410E, 410G, 444H LL, 444H, 444HTC, 544J, 710D.544H,624H, 1850 | See product specifications |
| John Deere Telehander: 3200, 3400, 3800 | See product specifications |
| John Deere Log Loader: 330B, 335, 335C, 430B, 435, 435C, 437C | See product specifications |
| John Deere Skidder: 360D, 460D, 540G, 640G, 648G III, 740G | See product specifications |
| John Deere Sprayer: 4700, 4710, 6700 | See product specifications |
| John Deere Windrower: 4890, 4895, 4990, 4995 | See product specifications |
| John Deere Feller Buncher: 643G, 643H, 653E, 653G, 740, 840, 843G, 843H | See product specifications |
| John Deere Combine: 7700, 9400, 9410, 9450 | See product specifications |
| John Deere Cotton Picker: 9935 | See product specifications |
| John Deere Axle: 1200,1400, RE151971 | See product specifications |
Replaces OEM Part Numbers
RE44508 • RE48786 • 29279 • SE500826 • SE500827 • SE501101 • Deere • Engine • 4045T • Powertech • 3029T • 3029D
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On John Deere engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On John Deere engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Which John Deere models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of John Deere models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference RE44508 with RE48786?
Yes. Both RE44508 and RE48786 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
This listing is for 4 pieces – do I need to buy a full set?
This listing includes 4 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
What are the common failure signs on a John Deere engine?
On John Deere engines, watch for black exhaust smoke under load, rough idle, misfire codes (P0300 series), and loss of power. A single failing injector can reduce engine output by up to 25%. If you notice fuel in the engine oil, the injector seat seal is likely compromised.
Reviews
There are no reviews yet.