3 Pieces Fuel Injector 49056-0038 for Kawasaki UTV KAF820 Mule 2016-2023 PRO-FX 2019-2023 PRO-FXR 2015-2023 PRO-FXT
This fuel injector is engineered as a direct replacement for the Kawasaki UTV KAF820 Mule 2016-2023 PRO-FX 2019-2023 PRO-FXR 2015-2023 PRO-FXT. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| 3 Pieces Fuel Injector 49056 | 0038 for Kawasaki UTV KAF820 Mule 2016-2023 PRO-FX 2019-2023 PRO-FXR 2015-2023 PRO-FXT Condition: New Aftermarket Part Note: We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues.Replacement Part Number: 49056-0038, 490560038 Applications:Fit for following models: 2015 Kawasaki KAF820 Mule PRO-FXT EPS2015 Kawasaki KAF820 Mule PRO-FXT EPS Camo2016 Kawasaki KAF820 Mule PRO-FX2016 Kawasaki KAF820 Mule PRO-FX EPS LE2016 Kawasaki KAF820 Mule PRO-FXT2017 Kawasaki KAF820 Mule PRO-FX EPS Camo2017 Kawasaki KAF820 Mule PRO-FXT2018 Kawasaki KAF820 Mule PRO-FX2018 Kawasaki KAF820 Mule PRO-FX EPS LE2018 Kawasaki KAF820 Mule PRO-FXT2018 Kawasaki KAF820 Mule PRO-FXT EPS2018 Kawasaki KAF820 Mule PRO-FXT EPS LE2019 Kawasaki KAF820 Mule PRO-FX2019 Kawasaki KAF820 Mule PRO-FX EPS2019 Kawasaki KAF820 Mule PRO-FX EPS LE2019 Kawasaki KAF820 Mule PRO-FXR2019 Kawasaki KAF820 Mule PRO-FXT2019 Kawasaki KAF820 Mule PRO-FXT EPS2019 Kawasaki KAF820 Mule PRO-FXT EPS Camo2019 Kawasaki KAF820 Mule PRO-FXT EPS LE2019 Kawasaki KAF820 Mule PRO-FXT Ranch Edition2020 Kawasaki KAF820 Mule PRO-FX2020 Kawasaki KAF820 Mule PRO-FX EPS2020 Kawasaki KAF820 Mule PRO-FX EPS LE2020 Kawasaki KAF820 Mule PRO-FXT2020 Kawasaki KAF820 Mule PRO-FXT EPS2020 Kawasaki KAF820 Mule PRO-FXT EPS Camo2020 Kawasaki KAF820 Mule PRO-FXT EPS LE2020 Kawasaki KAF820 Mule PRO-FXT Ranch Edition2021 Kawasaki KAF820 Mule PRO-FX2021 Kawasaki KAF820 Mule PRO-FX EPS2021 Kawasaki KAF820 Mule PRO-FX EPS LE2021 Kawasaki KAF820 Mule PRO-FXR2021 Kawasaki KAF820 Mule PRO-FXT2021 Kawasaki KAF820 Mule PRO-FXT EPS2021 Kawasaki KAF820 Mule PRO-FXT EPS Camo2021 Kawasaki KAF820 Mule PRO-FXT EPS LE2021 Kawasaki KAF820 Mule PRO-FXT Ranch Edition2022 Kawasaki KAF820 Mule PRO-FX2022 Kawasaki KAF820 Mule PRO-FX EPS2022 Kawasaki KAF820 Mule PRO-FXR2022 Kawasaki KAF820 Mule PRO-FXT EPS2023 Kawasaki KAF820 Mule PRO-FX2023 Kawasaki KAF820 Mule PRO-FX EPS2023 Kawasaki KAF820 Mule PRO-FX EPS LE2023 Kawasaki KAF820 Mule PRO-FXR2023 Kawasaki KAF820 Mule PRO-FXT |
Replaces OEM Part Numbers
49056-0038 • 490560038 • 2016-2023 • 2019-2023 • 2015-2023
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On Kawasaki engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On Kawasaki engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my Kawasaki KAF820?
Yes. This part is designed to fit the Kawasaki KAF820 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 49056-0038 with 490560038?
Yes. Both 49056-0038 and 490560038 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (KAF820) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
This listing is for 3 pieces – do I need to buy a full set?
This listing includes 3 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
Reviews
There are no reviews yet.