DEF Injector Assembly 8-98231898-2 for Isuzu Engine 4HG1T 4HK1 4JJ1 Truck NPR 2013-2018
This DEF injector is engineered as a direct replacement for the Isuzu Engine 4HG1T 4HK1 4JJ1 Truck NPR 2013-2018. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Isuzu Engine 4HG1T 4HK1 4JJ1 Truck NPR 2013 | 2018 Part Name: Diesel Exhaust Fluid Injector Assembly Replacement Part Number:8982318982, 8-98231898-2, 0444043107, 0444043111, 0 444 043 111 Fit For |
| Isuzu Engine: 4HG1T, 4HK1, 4JJ1 Applications:Fit For | See product specifications |
| Isuzu Truck: NPR | HD, NPR 2013-2018 |
Replaces OEM Part Numbers
8982318982 • 8-98231898-2 • 0444043107 • 0444043111 • Isuzu • Engine • 4HG1T • 98231898 • 2013-2018
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- SCR efficiency below threshold (P2047/P2050) — The system detects that the DEF isn’t being dosed correctly. The injector spray pattern is likely degraded or the nozzle is partially blocked.
- White crystallization on injector tip — Contaminated DEF leaves mineral deposits. If you see white buildup, the injector has been exposed to poor-quality or expired fluid.
- Derate or limp mode — The ECU limits engine power to prevent emissions violations when the SCR system can’t keep up. This is the most noticeable symptom.
- DEF consumption suddenly drops — If the tank level doesn’t go down at the normal rate, the injector isn’t spraying. The DEF pump and lines should be checked before replacing the injector.
- Ammonia smell from exhaust — Incomplete DEF mixing in the exhaust stream means the injector isn’t atomizing properly. The SCR reaction needs fine, even distribution.
Installation Notes
Drain the DEF tank before removing the old injector. Flush the DEF line with distilled water to remove any crystallized deposits. When installing the new injector, use the included sealing gasket and torque to specification — over-tightening cracks the injector housing. After installation, fill the tank with fresh DEF only (check the expiration date on the jug). Run the engine for 15 minutes at operating temperature to allow the SCR system to complete its initialization cycle.
Frequently Asked Questions
Which Isuzu models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Isuzu models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference 8982318982 with 8-98231898-2?
Yes. Both 8982318982 and 8-98231898-2 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2013 model – is it covered?
The compatibility range for this part includes 2013-2018. The 2013 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Why do DEF injectors fail repeatedly?
The number one cause is contaminated or expired DEF fluid. DEF degrades over time, especially in hot conditions. If you see white crystallization on the injector tip, the fluid quality was likely poor. Always use fresh DEF and replace the DEF filter when servicing the injector.




Reviews
There are no reviews yet.