Fuel Lift Pump 1447688M91 for Massey Ferguson Tractor 175 180 255 265 275 285
This fuel pump is engineered as a direct replacement for the Massey Ferguson Tractor 175 180 255 265 275 285. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Massey Ferguson Tractor 175 180 255 265 275 285 Replace Part Number:3637290M91,4222108M91,1447688M91,3641402M91,1066139M91,1447017M91,3641404M1 Applications:Fit For | See product specifications |
| Massey Ferguson Tractor:270, 283, 290, 375, 383, 390, 390T, 398, 670, 690, 3050, 3060, 3065, 3070Fit For Landini Built Tractor:174 | 4, 194-4, 274-4, 294-4Fit For Industrial Tractor:50C, 50D, 50E, 50F, 50H, HX60H TLB See Details |
| Massey Ferguson / 165 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 168 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 175 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 178 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 180 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 185 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 188 (Agricultural Tractor | 100 Series) |
| Massey Ferguson / 255 (Agricultural Tractor | 200 Series) |
| Massey Ferguson / 274 (Agricultural Tractor | 200 Series) |
| Massey Ferguson / 275 (Agricultural Tractor | 200 Series) |
Replaces OEM Part Numbers
3637290M91 • 4222108M91 • 1447688M91 • 3641402M91 • 1066139M91 • 1447017M91 • 3641404M1
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 3637290M91 with 4222108M91?
Yes. Both 3637290M91 and 4222108M91 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (HX60H) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
Reviews
There are no reviews yet.