6 Pieces Fuel Injector BA5Z-9F593-B for Ford 2013-2019 Explorer 2019 Police Interceptor Utility 2011-2019 Flex
This fuel injector is engineered as a direct replacement for the Ford 2013-2019 Explorer 2019 Police Interceptor Utility 2011-2019 Flex. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Ford Explorer 6 Cyl 3.5L DOHC T/C 6 | Speedl Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive2011-2019 |
| Ford Flex 6 Cyl 3.5L DOHC T/C 6 | Speedl Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive2019 |
| Ford Police Interceptor Sedan 6 Cyl 3.5 L GAS2019 | See product specifications |
| Ford Police Interceptor Utility 6 Cyl 3.5 L GAS2011 | 2019 |
Replaces OEM Part Numbers
FJ1117 • BA5Z9F593A • BA5Z-9F593-A • BA5Z-9F593-B • BA5Z9F593B • CM-5204 • CM5204 • 0261500324 • 0261500325 • 0261500115 • 2013-2019 • 2011-2019
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On Ford engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On Ford engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my Ford 2019?
Yes. This part is designed to fit the Ford 2019 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference FJ1117 with BA5Z9F593A?
Yes. Both FJ1117 and BA5Z9F593A are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
This listing is for 6 pieces – do I need to buy a full set?
This listing includes 6 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
My vehicle is a 2013 model – is it covered?
The compatibility range for this part includes 2013-2019. The 2013 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.