Stainless Steel Fuel Line Kit 20832563 819-845 for Chevrolet Silverado GMC Sierra 2500 3500 HD 6.6L V8 2004-2010
This fuel line is engineered as a direct replacement for the Chevrolet Silverado GMC Sierra 2500 3500 HD 6.6L V8 2004-2010. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Chevrolet Silverado | See product specifications |
| GMC Sierra 2500 3500 HD 6.6L V8 2004 | 2010 Replacement Part Number: 819-845, 819845, 20832563 Applications: Fit for following models |
| Chevrolet Vehicle: Silverado 2500 HD Classic 2007 6.6L V8Silverado 2500 HD 2004 | 2010 6.6L V8Silverado 3500 Classic 2007 6.6L V8Silverado 3500 HD 2007-2010 6.6L V8Silverado 3500 2004-2006 6.6L V8 |
| GMC Vehicle: Sierra 2500 HD Classic 2007 6.6L V8Sierra 2500 HD 2004 | 2010 6.6L V8Sierra 3500 Classic 2007 6.6L V8Sierra 3500 HD 2007-2010 6.6L V8Sierra 3500 2004-2006 6.6L V8 |
Replaces OEM Part Numbers
819-845 • 819845 • 20832563 • 2004-2010 • 2007-2010 • 2004-2006
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel line may be the cause:
- Fuel smell or visible wet spots — A cracked or perished fuel line seeps fuel. Diesel fuel lines harden with age and develop hairline cracks near connection points.
- Air in the fuel system — Air enters through deteriorated hoses, causing hard starting and rough running. Check all connections and replace any line that feels spongy.
- Collapsed line under suction — A reinforced fuel line can collapse internally, restricting flow. The engine runs fine at idle but starves under load.
- Fuel leaking at connection points — Old clamps lose tension and the hose shrinks over time. Always use new clamps when installing fuel lines.
Installation Tips
When installing new fuel lines, cut the ends square with a sharp blade — angled cuts cause leaks at the connection points. Use new clamps at every connection; old clamps have lost their spring tension. After installation, pressurize the system with the primer pump and check every fitting for dampness. Run the engine and recheck after 10 minutes of operation, as fittings can loosen slightly under vibration.
Frequently Asked Questions
Will this fit my Chevrolet 2500?
Yes. This part is designed to fit the Chevrolet 2500, 3500 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 819-845 with 819845?
Yes. Both 819-845 and 819845 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
I have a 6.6L engine – which version do I need?
This part covers 6.6L applications. To narrow down the exact fit, check your vehicle’s model year and engine code. The same displacement can have multiple engine variants with different fuel systems or emissions equipment.
My vehicle is a 2004 model – is it covered?
The compatibility range for this part includes 2004-2010. The 2004 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.




Reviews
There are no reviews yet.