Diesel Injector Diesel Fuel Pump 0445025602 for Caterpillar 3752647 375-2647 Perkins T410930 Engine
This fuel injector is engineered as a direct replacement for the Caterpillar 3752647 375-2647 Perkins T410930 Engine. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Perkins 1100 | See product specifications |
| Caterpillar | See product specifications |
| CAT C3.4 C4.4 C7.1 Engine 320 323 330 323D2 329D2 336 Excavator Replacement Part Number:T410930, 3752647, 375 | 2647, CA3752647, 0445025602, 0 445 025 602, 0445025601, 0 445 025 601 Fit For |
| Perkins Engine:1100Fit For | See product specifications |
| CAT Engine:C3.4, C3.4B, C4.4, C4.4B, C7, C7.1 Applications:Fit For | See product specifications |
| CAT Motor Grader:120 AWD, 120, 140 GCFit For | See product specifications |
| CAT Excavator:320, 323, 330, 318D2 L, 320 GC, 320D2 GC, 323D2 L, 326D2, 326D2 L, 326D2 L, 329D2, 329D2 L, 329D2 L, 330 GC, 330D2 L, 336 GC, M315D2, M317D2, M320D2, M322D2, M322D2 MH, M324D2 MH, 326D2 L, 330D2 LFit For | See product specifications |
| CAT Loader:924K, 930K ADL, 930K, 938K, 950 GC, 950L, 950M, 953K, 962L, 962M, 963K, 815K, 816KFit For | See product specifications |
| CAT Skidder:525D, 535D, 545D, 555DFit For | See product specifications |
| CAT Dozer:814KFit For | See product specifications |
| CAT Compactor:CB13, CB15, CB16, CB68B, CB7, CP68B, CP74B, CP76B, CS44B, CS54B, CS56B, CS64B, CS68B, CS74B, CS78B, CS79B, CW12, CW16, CW34Fit For | See product specifications |
| CAT Asphalt Paver:AP1055 F, AP500F, AP555F, AP600F, AP655F, AP655F LFit For | See product specifications |
Replaces OEM Part Numbers
T410930 • 3752647 • 375-2647 • CA3752647 • 0445025602 • 0445025601 • Perkins • Engine • 1100Fit • Caterpillar • C3.4B • C4.4B
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injection pump may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On Caterpillar engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On Caterpillar engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my Caterpillar 3752647?
Yes. This part is designed to fit the Caterpillar 3752647, T410930 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference T410930 with 3752647?
Yes. Both T410930 and 3752647 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (CB13, CB15, CB16, CB68B) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
What are the common failure signs on a Caterpillar engine?
On Caterpillar engines, watch for black exhaust smoke under load, rough idle, misfire codes (P0300 series), and loss of power. A single failing injector can reduce engine output by up to 25%. If you notice fuel in the engine oil, the injector seat seal is likely compromised.
Reviews
There are no reviews yet.