Fuel Feed Pump 119593-52000 119000-52000 for Yanmar Engine 3TN100E 4LHA 4LH 4TN100E 4TN100TL 6LYM
This fuel pump is engineered as a direct replacement for the Yanmar Engine 3TN100E 4LHA 4LH 4TN100E 4TN100TL 6LYM. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Yanmar Engine 3TN100E 4LHA 4LH 4TN100E 4TN100TL 6LYM Replacement Part Number: 119593 | 52000, 119000-52000, 11959352000, 11900052000 Fit For |
Replaces OEM Part Numbers
119593-52000 • 119000-52000 • 11959352000 • 11900052000 • Yanmar • Engine • 3S15C • 3TN100E-ACG • 3TN100E-ACGD • 3TN100E-DWS • 3TN100E-SB • 3TN100E-SD1
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Yanmar equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Yanmar equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Which Yanmar models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Yanmar models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference 119593-52000 with 119000-52000?
Yes. Both 119593-52000 and 119000-52000 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 9593 model – is it covered?
The compatibility range for this part includes 9593-5200. The 9593 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
How long does a Yanmar fuel pump typically last?
Fuel pump life varies by application, but on Yanmar equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.
Reviews
There are no reviews yet.