Fuel Injector 16600-0F020 16600-65N00 for Nissan Engine TD27T TD42 Navara D21
This fuel injector is engineered as a direct replacement for the Nissan Engine TD27T TD42 Navara D21. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Nissan Engine:TD27T, TD42, TD27TI Application:Fit for | See product specifications |
| Nissan Navara D21 See Details | See product specifications |
| Nissan Navara 1997 D21 Ute 2.7 D 4WD AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1996 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1996 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 62kW TD27 2663cc 62kW (Diesel) | See product specifications |
| Nissan Navara 1996 D21 Ute 2.7 D 4WD AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1995 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1995 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 62kW TD27 2663cc 62kW (Diesel) | See product specifications |
| Nissan Navara 1995 D21 Ute 2.7 D 4WD AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1994 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
| Nissan Navara 1994 D21 Platform/Chassis 2.7 D 4×4 AWD Diesel 2.7L 4cyl 62kW TD27 2663cc 62kW (Diesel) | See product specifications |
| Nissan Navara 1994 D21 Ute 2.7 D 4WD AWD Diesel 2.7L 4cyl 58kW TD27 2664cc 58kW (Diesel) | See product specifications |
Replaces OEM Part Numbers
166000F020 • 166000F02A • 1660065N00 • 5861026820 • 1660065N20 • 1660090102 • 1660063G01 • 166000F000 • 166000F00A • 1660063G21 • 16600-0F020 • 16600-0F02A
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my Nissan TD27T?
Yes. This part is designed to fit the Nissan TD27T, TD42, D21 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 166000F020 with 166000F02A?
Yes. Both 166000F020 and 166000F02A are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (TD27T, TD42, TD27) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
My vehicle is a 6600 model – is it covered?
The compatibility range for this part includes 6600-9010. The 6600 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.