4 Pieces Fuel Injector A6460700487 0445110263 0445110179 for Mercedes-Benz Viano Vito Mixto
This fuel injector is engineered as a direct replacement for the Mercedes-Benz Viano Vito Mixto. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| 4 Pieces Fuel Injector A6460700487 0445110263 0445110179 for Mercedes | Benz Viano Vito Mixto Condition: New Aftermarket Part Note: We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues. Always use clean oil. Replacement Part Number: A6460700487, 6460700487, 0986435115, 0986435116, 0445110263, 0445110264, 0445110180, 0445110179, 0 986 435 115, 0 986 435 116, 0 445 110 263, 0 445 110 264, 0 445 110 180, 0 445 110 179 Applications:Fit For Mercedes-Benz Vehicle:Viano 2003-2013 W639 CDI 2.0 2148 ccm, 80 KW, 109 PSViano 2005-2013 W639 CDI 2.0 2148 ccm, 85 KW, 116 PSViano 2003-2013 W639 CDI 2.2 2148 ccm, 110 KW, 150 PSViano 2005-2013 W639 CDI 2.2 4matic 2148 ccm, 110 KW, 150 PSViano 2005-2013 W639 CDI 2.0 4matic 2148 ccm, 80 KW, 109 PSVito/Mixto Kasten 2003-2014 W639 109 CDI 2148 ccm, 65 KW, 88 PSVito/Mixto Kasten 2003-2014 W639 111 CDI 2148 ccm, 80 KW, 109 PSVito/Mixto Kasten 2007-2014 W639 111 CDI 2148 ccm, 85 KW, 116 PSVito/Mixto Kasten 2007-2014 W639 111 CDI 4×4 2148 ccm, 80 KW, 109 PSVito/Mixto Kasten 2003-2014 W639 115 CDI 2148 ccm, 110 KW, 150 PSVito/Mixto Kasten 2006-2014 W639 115 CDI 4×4 2148 ccm, 110 KW, 150 PSVito/Mixto Panelvan/Van 109 CDI 2003- 65 kW 88 PS 2148 ccVito/Mixto Panelvan/Van 111 CDI 2007- 85 kW 116 PS 2148 ccVito/Mixto Panelvan/Van 111 CDI 2003- 80 kW 109 PS 2148 ccVito/Mixto Panelvan/Van 115 CDI 2003- 110kW 150 PS 2148 ccVito/Mixto Panelvan/Van 115 CDI 2006- 110 kW 150 PS 2148 ccVito Bus 2003-2014 W639 109 CDI 2148 ccm, 65 KW, 88 PSVito Bus 2003-2014 W639 111 CDI 2148 ccm, 80 KW, 109 PSVito Bus 2007-2014 W639 111 CDI 2148 ccm, 85 KW, 116 PSVito Bus 2007-2014 W639 111 CDI 4×4 2148 ccm, 80 KW, 109 PSVito Bus 2003-2014 W639 115 CDI 2148 ccm, 110 KW, 150 PSVito Bus 2007-2014 W639 115 CDI 4×4 2148 ccm, 110 KW, 150 PS |
Replaces OEM Part Numbers
A6460700487 • 6460700487 • 0986435115 • 0986435116 • 0445110263 • 0445110264 • 0445110180 • 0445110179
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Which Mercedes models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Mercedes models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference A6460700487 with 6460700487?
Yes. Both A6460700487 and 6460700487 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
This listing is for 4 pieces – do I need to buy a full set?
This listing includes 4 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
My vehicle is a 2003 model – is it covered?
The compatibility range for this part includes 2003-2013. The 2003 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.