Fuel Injection Unit Pump 04289982 for Deutz Engine TCD2012B TCD2012L042V TCD2012L06 TCD2012L4 TCD4.1 TCD4.1L4 TCD4L2012 TCD6.1 TCD6.1L6
This fuel pump is engineered as a direct replacement for the Deutz Engine TCD2012B TCD2012L042V TCD2012L06 TCD2012L4 TCD4.1 TCD4.1L4 TCD4L2012 TCD6.1 TCD6.1L6. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Deutz Engine: TCD 4L 2012, TCD 6L 2012, TCD2012 L04 2V, TCD2012 L06, TCD2012 L06 2V, TCD2012 L06 4V, TCD2012 L4, TCD2012B, TCD2012L042V, TCD2012L06 2V, TCD4.1, TCD4.1 L4, TCD6.1, TCD6.1 L6, TCD6.1L6Fit for | See product specifications |
| Volvo Penta Enigne: D6E Application: Fit for Fendt Tractor: Vario 411, Vario 412, Vario 413, Vario 414, Vario 415, Vario 512, Vario 513, Vario 514, Vario 516, Vario 712, Vario 714, Vario 716, Vario 718, Vario 720, Vario 722, Vario 724, Vario 818, Vario 820Fit for | See product specifications |
| Volvo Compactor: DD120C, DD140CFit for | See product specifications |
| Volvo Excavator: EC140C, EC140D, EC140E, EC160C, EC160D, EC160E, EC180C, EC180D, EC180E, EC200B, EC210B, EC210C, EC220D, EC235C, EC235D, ECR145C, ECR145D, ECR145E, ECR235C, ECR235D, EW140D, EW145B, EW160C, EW160D, EW180C, EW180D, EW205D, EW210C, EW210D, EW230C, EW140EFit for | See product specifications |
| Volvo Loader: FC2121C, FC2421C, L45G, L60F, L70F, L90F | See product specifications |
Replaces OEM Part Numbers
0428-9982 • 0211-3695 • 4289982 • 2113695 • 04289982 • 02113695 • Deutz • Engine • TCD2012 • TCD2012B • TCD2012L042V • TCD2012L06
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injection pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Deutz equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Deutz equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Deutz TCD2012B?
Yes. This part is designed to fit the Deutz TCD2012B, TCD2012L042V, TCD2012L06, TCD2012L4 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 0428-9982 with 0211-3695?
Yes. Both 0428-9982 and 0211-3695 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (DD120C, EC140C, EC140D, EC140E) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
My vehicle is a 0428 model – is it covered?
The compatibility range for this part includes 0428-9982. The 0428 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.