Throttle Body 04892945AB 4892945AA 67-7015 for Dodge Dart 2013-2016 Fiat 500 2012-2016
This throttle body assembly is engineered as a direct replacement for the Dodge Dart 2013-2016 Fiat 500 2012-2016. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Dodge Dart 2013 | 2016 Fiat 500 500L 2012-2016 Replacement Part Number: 04892945AB, 4892945AA, 67-7015, 677015 Application:Fit for |
| Dodge Vehicle:2016 | See product specifications |
| Dodge Dart Aero Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2016 |
| Dodge Dart SXT Sport Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2015 |
| Dodge Dart Aero Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2014 |
| Dodge Dart Aero Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2013 |
| Dodge Dart Limited Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2013 |
| Dodge Dart Rallye Sedan 4 | Door 1.4L 1368CC 83Cu. In. l4 GAS SOHC Turbocharged2013 |
Replaces OEM Part Numbers
04892945AB • 4892945AA • 67-7015 • 677015 • Application • Dodge • Vehicle • Sedan • 4-Door • 1368CC • 83Cu. • Turbocharged2016
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the throttle body may be the cause:
- Surging or fluctuating idle speed — The throttle plate or motor is sticking, causing the ECU to hunt for the correct idle position. This is the most common early symptom.
- Reduced throttle response — A dirty or worn throttle body doesn’t open smoothly. You’ll notice a dead spot or hesitation when you press the pedal.
- Check engine light with P0121 or P1545 — These codes indicate a throttle position correlation error. If cleaning doesn’t clear them, the throttle body needs replacement.
- Limp mode activation — The ECU limits engine speed when it can’t trust the throttle position signal. This safety mode prevents damage but limits operation.
- High idle that won’t come down — Carbon buildup holds the throttle plate slightly open. The ECU compensates by raising fuel trim, which may trigger adaptive mixture codes.
- Stalling at low RPM — When the throttle body can’t maintain a stable idle, the engine may stall at stoplights or when shifting from drive to reverse.
Post-Installation Adaptation
After installing the new throttle body, perform a throttle adaptation so the ECU learns the new zero and full-throttle positions. With VCDS or equivalent: go to Engine, Basic Settings, channel 060 or 098 (varies by ECU), and follow the on-screen prompts. Without a diagnostic tool, use the manual method: turn the key ON (engine off) for 60 seconds, then OFF for 10 seconds. Start the engine and let it idle for 3 minutes without touching the accelerator. Do not rev the engine during this process.
Frequently Asked Questions
Will this fit my Dodge 500?
Yes. This part is designed to fit the Dodge 500 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 04892945AB with 4892945AA?
Yes. Both 04892945AB and 4892945AA are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2013 model – is it covered?
The compatibility range for this part includes 2013-2016. The 2013 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Do I need to do a throttle adaptation after installing this?
Yes. After installing the new throttle body, run a throttle adaptation (basic setting) so the ECU learns the new zero and full-throttle positions. With VCDS: Engine, Basic Settings, Group 060 or 098. Without a diagnostic tool: key ON for 60 seconds, OFF for 10 seconds, then start and idle for 3 minutes without touching the gas pedal.
Reviews
There are no reviews yet.