Fuel Injection 0445120141 Replacement for Bosch Amur Gaz Kavz Kurgan
This fuel injector is engineered as a direct replacement for the Bosch Amur Gaz Kavz Kurgan. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Injection 0445120141 Replacement for Bosch Amur Gaz Kavz Kurgan Part Number:0445120141 Applications:Amur 531320 4.8 d 134 2008 | 2012 D 245.9 E3Gaz Valday 4.5 d 121 2008- D 245.7 E3, 3309Kavz Kurgan 324410 4.8 d 154 2008- D 245.30 E3Liaz 6212 11.1 406 2008- 650 DCi 11Maz Minsk 103 7.1 d 216-227 2002- D 260.5 E2, D 260.5 E3Maz Minsk 437041 4.8 d 154 2008- D 245.30 E3Maz Minsk 457043 4.8 d 154 2008- D 245.30 E3Maz Minsk 555147 7.1 d 227 2008- D 260.5 E3MMZ D Series 4.8 d 120-188 2007- D 245, D 249, 245, 249MMZ D Series 7.1 d 227 2008- D 260 E3, 260, E3MMZ D Series 7.9 d 295 2007- D 262 S2, 262, S2MMZ D Series 8.7 d 345 2007- D 263.1 E3, 269.1, E3Minsk Tractor Belarus 4.8 d 141 2008- D 245 E3, 1025, MTZZil 5301EE 4.8 d 134 2008- D 245.9 E3Zil 433185 7.1 d 227 2008- D 260.5 E3Zil 4334B1 4.8 d 154 2008- D 245.30 E3 |
Replaces OEM Part Numbers
0445120141 • 531320 • 2008-2012 • 324410 • 216-227 • 437041 • 457043 • 555147 • 120-188
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Can I cross-reference 0445120141 with 531320?
Yes. Both 0445120141 and 531320 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2008 model – is it covered?
The compatibility range for this part includes 2008-2012. The 2008 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.