Fuel Pump Assembly 60307088000 for 2015-2016 KTM 1050 Adventure ABS
This fuel pump is engineered as a direct replacement for the 2015-2016 KTM 1050 Adventure ABS. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Pump Assembly 60307088000 for 2015 | 2016 KTM 1290 Super Adventure 990 Supermoto T Replacement Part Number: 60307088000 Application:Fit for Following Models:2002-2006 KTM 950 Adventure2004-2006 KTM 950 Adventure S2004 KTM 950 Duke2006-2009 KTM 950 Super Enduro R2005-2008 KTM 950 Supermoto2006-2013 KTM 990 Adventure2013-2014 KTM 990 Adventure Baja2012 KTM 990 Adventure Blue2011 KTM 990 Adventure Dakar2006-2012 KTM 990 Adventure S2011-2012 KTM 990 Adventure White2007-2012 KTM 990 LC8 Adventure2010-2011 KTM 990 SMR2010-2013 KTM 990 SMT2005-2011 KTM 990 Super Duke2007-2011 KTM 990 Super Duke R2011 KTM 990 Supermoto2011 KTM 990 Supermoto R2011-2014 KTM 990 Supermoto T2015-2016 KTM 1050 Adventure2017-2019 KTM 1090 Adventure R2013-2017 KTM 1190 Adventure2013-2016 KTM 1190 Adventure R2008-2011 KTM 1190 RC82010-2012 KTM 1190 RC8 R2009-2016 KTM 1190 RC8R2014-2022 KTM 1290 Super Duke R2016-2020 KTM 1290 Super Duke GT2014 KTM 1290 Super Duke2017 KTM 1290 Super Adventure T2017-2022 KTM 1290 Super Adventure S2017-2022 KTM 1290 Super Adventure R2015-2016 KTM 1290 Super Adventure |
Replaces OEM Part Numbers
60307088000 • Application • Following • Models • 2002-2006 • Adventure2004-2006 • Adventure • S2004 • Duke2006-2009 • Super • Enduro • R2005-2008
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 60307088000 with Application?
Yes. Both 60307088000 and Application are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2015 model – is it covered?
The compatibility range for this part includes 2015-2016. The 2015 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.