For Perkins Engine 1006T 9073 Lift Fuel Pump ULPK0036 2641A068
This fuel pump is engineered as a direct replacement for the Perkins Engine 1006T 9073 Lift Fuel Pump ULPK0036 2641A068. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| For Perkins Engine 1006T 9073 Lift Fuel Pump ULPK0036 2641A068 Part No.: ULPK0036 Can Replace Part No.: 2641A083,ULPK0035,2641A084 Specification:width : 95 mm Height : 95 mm Depth : 170 mm Application:Engine Type : VK Engine:1106C | E60TAVK31483 VK31484 VK31485 VK31486 VK31487 VK31488 VK31503 VK31504 VK31505 VK31506 VK31507 VK37774 VK37776 VK37779 VK37780 VK37781 VK37782 VK37783 VK37784 VK37785 VK37786 VK37787 VK37788 VK37791 VK37792 VK37794 VK37796 VK37797 VK37800 VK37801 VK37802 VK37803 VK37804 VK37808 VK37809 VK37810 VK37811 VK37813 VK37817 VK37818 VK37841 VK37849 VK37850 VK37851 VK37852 VK37857 VK37859 VK37861 VK37862 VK37870 VK37871 VK37886 VK37891 VK37909 VK37944 VK37948 VK37949 VK37950 VK37951 VK37952 VK37965 VK37972 VK37977 VK37987 VK38006 VK38010 VK38021 VK38026 VK38030 VK38032 VK38035 VK38036 VK38065 VK38132 VK38133 VK38140 VK38145 VK38147 VK38177 VK38185 VK38193 VK38222 VK38226 VK38228 VK38233 VK38244 VK38261 VK38266 VK38287 VK38299 VK38300 VK38302 VK38317 VK38331 VK38333 VK38349 VK38386 VK38393 VK38409 VK38415 VK51160 VK51186 VK51194 VK51195 VK51397 VK70578 VK70607 VK70612 VK70616 VK70617 VK70618 VK70619 VK70620 VK81343 VK81503 VK81613 VK81614 VK81616 VK81617 VK81618 VK81619 VK81620 VK81624 VK81627 VK81628 |
Replaces OEM Part Numbers
2641A068 • 2641A083 • 2641A084 • 1106C-E60TAVK31483
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Perkins equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Perkins equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Perkins 1006T?
Yes. This part is designed to fit the Perkins 1006T, 9073, ULPK0036 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 2641A068 with 2641A083?
Yes. Both 2641A068 and 2641A083 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How long does a Perkins fuel pump typically last?
Fuel pump life varies by application, but on Perkins equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.
What tools do I need to install this on a Perkins?
Standard metric hand tools will handle most of the job – sockets, wrenches, and a torque wrench. For Perkins equipment, check the specific service manual for any special tools or torque values.
Reviews
There are no reviews yet.