Fuel Pump Assembly 16117195469 16117212587 for BMW X5 X6 2007-2019
This fuel pump is engineered as a direct replacement for the BMW X5 X6 2007-2019. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| BMW X5 X6 2007 | 2019 Replacement Part Number: 16117195469, 16117212587, 16117366123, 16117195470, 16-11-7-195-469, 16-11-7-366-123, 16-11-7-212-587, 16-11-7-195-470 Applications:Fit for following models: 2007-2018 |
| BMW X5 3.0si, 4.8i, M, xDrive50i, sDrive35i, xDrive35i, xDrive40e, xDrive30i, xDrive35i, xDrive48i, xDrive50i 2.0L L4 | Electric/Gas, 2.0L L4 – PLUG-IN HYBRID EV-GAS (PH, 3.0L L6 – Gas, 4.8L V8 – Gas2008-2019 |
| BMW X6 ActiveHybrid, M, xDrive35i, xDrive50i, sDrive35i 3.0L L6 | Gas, 4.4L V8 – Electric/Gas, 4.4L V8 – FULL HYBRID EV-GAS (FHEV), 4.4L V8 – Gas |
Replaces OEM Part Numbers
16117195469 • 16117212587 • 16117366123 • 16117195470 • 16-11-7-195-469 • 16-11-7-366-123 • 16-11-7-212-587 • 16-11-7-195-470 • 2007-2019 • 195-469 • 366-123 • 212-587
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Which BMW models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of BMW models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference 16117195469 with 16117212587?
Yes. Both 16117195469 and 16117212587 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2007 model – is it covered?
The compatibility range for this part includes 2007-2019. The 2007 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
How long does a BMW fuel pump typically last?
Fuel pump life varies by application, but on BMW equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.
Reviews
There are no reviews yet.