VP44 Fuel Injection Pump 8973775200 8973775202 for Isuzu Engine 4JH1 4JH1-TC 4KH1 4KH1-TC 3.0L Truck TFR TFS Vehicle D-Max

VP44 Fuel Injection Pump 8973775200 8973775202 for Isuzu Engine 4JH1 4JH1-TC 4KH1 4KH1-TC 3.0L Truck TFR TFS Vehicle D-Max

This fuel pump is engineered as a direct replacement for the Isuzu Engine 4JH1 4JH1-TC 4KH1 4KH1-TC 3.0L Truck TFR TFS Vehicle D-Max. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.

Vehicle Compatibility

Replaces OEM Part Numbers

Isuzu • 8-97377-520-2 • 8-97377-520-0 • 8-9737-7520-2 • 8-9737-7520-0 • 8-9737-7520-1 • 8-97377520-2 • 8-97377520-0 • 8-97377520-1 • 8973775202 • 8973775200 • 8973775201Bosch

Signs You Need a Replacement

If your equipment is showing any of these symptoms, the injection pump may be the cause:

• Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
• Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
• Fuel pressure warning (if equipped) — Modern Isuzu equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
• Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
• Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
• Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.

Before You Replace the Pump

Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Isuzu equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.

Frequently Asked Questions

Which Isuzu models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Isuzu models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.

Can I cross-reference Isuzu with 8-97377-520-2?
Yes. Both Isuzu and 8-97377-520-2 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.

My engine code is VP44 with a 3.0L displacement – is this the right part?
Yes. Engine code VP44 with 3.0L displacement is within the supported range for this part. The full list of compatible engine codes includes: VP44. Confirm your engine code on the data plate attached to the engine block.

My vehicle is a 9737 model – is it covered?
The compatibility range for this part includes 9737-7520. The 9737 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.

You May Also Need