Aftermarket Dynamic FLK-38 Fuel Line Repair Kit

Aftermarket Dynamic FLK-38 Fuel Line Repair Kit

This fuel line is manufactured to OEM specifications as a direct replacement part. Each unit undergoes quality testing for flow rate, pressure rating, and durability to ensure reliable field performance. Designed for professional mechanics and fleet operators who need parts that fit right the first time.

Replaces OEM Part Numbers

FLK-38 • FLK38 • Content • NYLON • TUBING2X • DEGREE • QUICK • DISCONNECT2X • STRAIGHT • STEEL • COMPRESSION • UNION2X

Signs You Need a Replacement

If your equipment is showing any of these symptoms, the fuel line may be the cause:

• Fuel smell or visible wet spots — A cracked or perished fuel line seeps fuel. Diesel fuel lines harden with age and develop hairline cracks near connection points.
• Air in the fuel system — Air enters through deteriorated hoses, causing hard starting and rough running. Check all connections and replace any line that feels spongy.
• Collapsed line under suction — A reinforced fuel line can collapse internally, restricting flow. The engine runs fine at idle but starves under load.
• Fuel leaking at connection points — Old clamps lose tension and the hose shrinks over time. Always use new clamps when installing fuel lines.

Installation Tips

When installing new fuel lines, cut the ends square with a sharp blade — angled cuts cause leaks at the connection points. Use new clamps at every connection; old clamps have lost their spring tension. After installation, pressurize the system with the primer pump and check every fitting for dampness. Run the engine and recheck after 10 minutes of operation, as fittings can loosen slightly under vibration.

Frequently Asked Questions

Can I cross-reference FLK-38 with FLK38?
Yes. Both FLK-38 and FLK38 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.

How do I check if my engine code (FLK38) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.

What material are these fuel lines made from?
This fuel line kit uses materials rated for the specific fuel type and pressure of your application. Diesel lines need to handle higher pressure than gasoline lines. Always install the correct fuel-rated line and use new clamps at every connection point.

You May Also Need