12V Fuel Pump AH130127 AH107362 AH80665 for John Deere 3029 4039 Engine 1032 1065 3300 4400 6600 7700 7720 116H 175
This fuel pump is engineered as a direct replacement for the John Deere 3029 4039 Engine 1032 1065 3300 4400 6600 7700 7720 116H 175. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| John Deere 3029 4039 Engine 1032 1065 3300 4400 6600 7700 7720 116H 175 Replace Part Number:AH130127, AH107362, AH80665 Fit for Engine | See product specifications |
| John Deere Tractor: 116, 116H, 175, 185, 400, 5300, 5300N, 5310, 5310N, 5400, 5400N, 5410, 5410N, 5500, 5500N, 5510, 5510N, FC420V, FC540V | See product specifications |
Replaces OEM Part Numbers
AH130127 • AH107362 • AH80665 • Engine • Deere • 3029DF120 • 3029DF180 • 3029TF120 • 3029TF150 • 3029TF160 • 3029TF270 • 4039DF001
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern John Deere equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on John Deere equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my John Deere 3029?
Yes. This part is designed to fit the John Deere 3029, 4039, 1032, 1065 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference AH130127 with AH107362?
Yes. Both AH130127 and AH107362 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (FC420V, FC540V) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
How long does a John Deere fuel pump typically last?
Fuel pump life varies by application, but on John Deere equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.
Reviews
There are no reviews yet.