6 Pcs Bosch Fuel Injector 0445120273 5263307 for Cummins Engine ISBE6 ISBE5.9 Ford Cargo VW Worker
This fuel injector is engineered as a direct replacement for the Cummins Engine ISBE6 ISBE5.9 Ford Cargo VW Worker. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Cummins Engine ISBE6 ISBE5.9 | See product specifications |
| Cummins Engine:ISBE6,ISBE5.9 Application:Fit for following models:DAF CF 5.9 d 185 | 250 2001-2007 CE 136, CE 162, CE 184 C, Euro 3DAF LF 3.9 d 150-167 2001-2007 BE 110 C, BE 123 C, 45, .150, .170, Euro 3DAF LF 5.9 d 135-250 2001-2009 BE 99, CE 136 C, CE 162 C, CE 184 C, Euro 3 |
| Ford Cargo Pick | Up C 1517 E 170 HP 2005.01-Up |
| Ford Cargo Pick | Up C1722 E 218 HP 2006.01-Up |
| Ford Cargo Pick | Up C 815 E 150 HP 4 BTAA 2000.11-Up |
| Ford Cargo Pick | Up C 1717 E 170 HP 2005.01-Up |
| VW Worker Pick | Up 13.170 170 HP ISBE 170 2004.01-Up |
Replaces OEM Part Numbers
0445120273 • 5263307 • 5263307RX • 5263307NX • Cummins • Engine • ISBE6 • ISBE5.9 • Application • following • models • 185-250
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On Cummins engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On Cummins engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Which Cummins models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Cummins models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference 0445120273 with 5263307?
Yes. Both 0445120273 and 5263307 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
This listing is for 6 pieces – do I need to buy a full set?
This listing includes 6 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
My vehicle is a 2001 model – is it covered?
The compatibility range for this part includes 2001-2007. The 2001 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.