6 Pieces Fuel Injector 68F-13761-00-00 E7T25071 for Yamaha 150HP 175HP 200HP Outboard Motor
This fuel injector is engineered as a direct replacement for the Yamaha 150HP 175HP 200HP Outboard Motor. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| 6 Pieces Fuel Injector 68F | 13761-00-00 E7T25071 for Yamaha 150HP 175HP 200HP Outboard Motor Condition: New Aftermarket Part Note: We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues. Replacement Part Number: 68F-13761-00-00, 68F137610000, E7T25071 Applications: Fit for Yamaha Outboard Motor: 2000 LZ150TXRY2000 LZ200TRY2000 LZ200TXRY2000 VZ150TLRY2000 Z150TLRY2000 Z150TXRY2000 Z200TLRY2000 Z200TRY2000 Z200TXRY2001 LZ150TXRZ2001 LZ200TXRZ2001 VZ150TLRZ2001 VZ175TLRZ2001 VZ200TLRZ2001 Z150TLRZ2001 Z150TXRZ2001 Z175TXRZ2001 Z200TLRZ2001 Z200TXRZ2002 LZ150TXRA2002 LZ200TXRA2002 VZ150TLRA2002 VZ175TLRA2002 VZ200TLRA2002 Z150TLRA2002 Z150TXRA2002 Z175TXRA2002 Z200TXRA2003 LZ150TXRB2003 LZ200TXRB2003 VZ150TLRB2003 VZ175TLRB2003 VZ200TLRB2003 Z150TLRB2003 Z150TXRB2003 Z175TXRB2003 Z200TXRB2004 LZ150TXRC2004 LZ200TXRC2004 VZ150TLRC2004 VZ175TLRC2004 VZ200TLRC2004 Z150TXRC2004 Z175TXRC2004 Z200TXRC2005 LZ150TXRD2005 LZ200TXRD2005 VZ150TLRD2005 VZ175TLRD2005 Z150TXRD2005 Z175TXRD2005 Z200TLRD2005 Z200TXRD2006 and later LZ150TXR2006 and later LZ200TXR2006 and later LZ200TXR_02006 and later VZ150TLR2006 and later VZ150TLR_02006 and later VZ175TLR2006 and later VZ175TLR_02006 and later Z150TXR2006 and later Z175TXR2006 and later Z200TLR2006 and later Z200TXR2006 and later Z200TXR_012006 and later Z200TXR_04 |
Replaces OEM Part Numbers
68F-13761-00-00 • 68F137610000 • E7T25071
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Can I cross-reference 68F-13761-00-00 with 68F137610000?
Yes. Both 68F-13761-00-00 and 68F137610000 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
This listing is for 6 pieces – do I need to buy a full set?
This listing includes 6 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
Reviews
There are no reviews yet.