8 Pieces Fuel Injector 12613412 for GMC Silverado Sierra 2010-2013 6.0L V8 6.6L
This fuel injector is engineered as a direct replacement for the GMC Silverado Sierra 2010-2013 6.0L V8 6.6L. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Chevrolet Express 25002010 | 2020 |
| Chevrolet Express 35002010 | 2019 |
| Chevrolet Express 45002010 | 2019 |
| Chevrolet Silverado 2500 HD2010 | 2019 |
| Chevrolet Silverado 3500 HD2016 | 2017 |
| Chevrolet Suburban2010 | 2013 |
| Chevrolet Suburban 25002018 | 2019 |
| Chevrolet Suburban 3500 HD2010 | 2020 |
| GMC Savana 25002010 | 2020 |
| GMC Savana 35002010 | 2019 |
| GMC Savana 45002010 | 2019 |
| GMC Sierra 25002010 | 2019 |
Replaces OEM Part Numbers
12613412 • FJ10736 • 28076139 • 217-3412 • 2173412 • FJ1089 • 2010-2013
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On GMC engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On GMC engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Which GMC models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of GMC models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.
Can I cross-reference 12613412 with FJ10736?
Yes. Both 12613412 and FJ10736 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
I have a 6.0L engine – which version do I need?
This part covers 6.0L applications. To narrow down the exact fit, check your vehicle’s model year and engine code. The same displacement can have multiple engine variants with different fuel systems or emissions equipment.
This listing is for 8 pieces – do I need to buy a full set?
This listing includes 8 units. For best results, replace all injectors at the same time rather than one at a time. Mixing old and new units causes uneven fuel delivery and shortens the life of the new parts.
Reviews
There are no reviews yet.