Complete Throttle Body 22030-0H041 for Toyota Camry 2.4L 2005 2006
This throttle body assembly is engineered as a direct replacement for the Toyota Camry 2.4L 2005 2006. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Toyota Camry 2.4L 2005 2006 Part Number:22030 | OH041,22030-0H041,22030OH041,220300H041 Applications:2007-2009 For |
| Toyota For Camry 4 cyl 2.4L2010 | 2011 For |
| Toyota For Camry,VIN B (5th digit,hybrid),(4 cyl 2.4L)2009 | 2012 For |
| Toyota For Corolla 4 cyl 2.4L 2009 | 2013 For |
| Toyota For Matrix 4 cyl 2.4L 2006 | 2008 For |
| Toyota For RAV4 4 cyl 2.4L 2007 | 2008 For |
| Toyota For Solara 4 cyl 2.4L2010 | 2012 Lexus HS250h 4 cyl 2.4L2006-2010 Scion TC 2.4L 2008-2015 Scion XB 2.4L |
Replaces OEM Part Numbers
22030-OH041 • 22030-0H041 • 22030OH041 • 220300H041 • 2007-2009 • 2009-2013 • 2006-2008 • 2007-2008 • 2008-2015
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the throttle body may be the cause:
- Surging or fluctuating idle speed — The throttle plate or motor is sticking, causing the ECU to hunt for the correct idle position. This is the most common early symptom.
- Reduced throttle response — A dirty or worn throttle body doesn’t open smoothly. You’ll notice a dead spot or hesitation when you press the pedal.
- Check engine light with P0121 or P1545 — These codes indicate a throttle position correlation error. If cleaning doesn’t clear them, the throttle body needs replacement.
- Limp mode activation — The ECU limits engine speed when it can’t trust the throttle position signal. This safety mode prevents damage but limits operation.
- High idle that won’t come down — Carbon buildup holds the throttle plate slightly open. The ECU compensates by raising fuel trim, which may trigger adaptive mixture codes.
- Stalling at low RPM — When the throttle body can’t maintain a stable idle, the engine may stall at stoplights or when shifting from drive to reverse.
Post-Installation Adaptation
After installing the new throttle body, perform a throttle adaptation so the ECU learns the new zero and full-throttle positions. With VCDS or equivalent: go to Engine, Basic Settings, channel 060 or 098 (varies by ECU), and follow the on-screen prompts. Without a diagnostic tool, use the manual method: turn the key ON (engine off) for 60 seconds, then OFF for 10 seconds. Start the engine and let it idle for 3 minutes without touching the accelerator. Do not rev the engine during this process.
Frequently Asked Questions
Will this fit my Toyota 2005?
Yes. This part is designed to fit the Toyota 2005, 2006 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 22030-OH041 with 22030-0H041?
Yes. Both 22030-OH041 and 22030-0H041 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My engine code is OH041 with a 2.4L displacement – is this the right part?
Yes. Engine code OH041 with 2.4L displacement is within the supported range for this part. The full list of compatible engine codes includes: OH041. Confirm your engine code on the data plate attached to the engine block.
My vehicle is a 2007 model – is it covered?
The compatibility range for this part includes 2007-2009. The 2007 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.