Electric Fuel Pump 87472310 302867A1 for CASE Combine 2344 2366 2377 2388 2577 2588 1460 1644 1680 2166 2188
This fuel pump is engineered as a direct replacement for the CASE Combine 2344 2366 2377 2388 2577 2588 1460 1644 1680 2166 2188. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| 12V Electric Fuel Pump 87472310 302867A1 for CASE Combine 2344 2366 2377 2388 2577 2588 1460 1644 1680 2166 2188 Replacement Part Number:87472310, 140351A1, 1541797C1, 196503C1, 196503C2, 302867A1, P76913 Application:Fit For CASE Combine: 1460, 1666, 1644, 1670, 715, 1680, 1440, 1688, 2388, 2144, 2166, 2188, 2344, 2366, 2577, 2588, 2377 | See product specifications |
Replaces OEM Part Numbers
87472310 • 140351A1 • 1541797C1 • 196503C1 • 196503C2 • 302867A1 • P76913 • Application • Combine
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 87472310 with 140351A1?
Yes. Both 87472310 and 140351A1 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.




Reviews
There are no reviews yet.