Fuel Common Rail Assembly VA32G6100901 0445224040 for Komatsu Engine D04F Kobelco Excavator SK130-8 SK140-8 SK140SRLC
This fuel pump is engineered as a direct replacement for the Komatsu Engine D04F Kobelco Excavator SK130-8 SK140-8 SK140SRLC. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Komatsu Engine D04F Kobelco Excavator SK130 | 8 SK140-8 SK140SRLC Replacement Part Number: VA32G6100901, VA32G6100900, 0445224040, 32G61-00901, 32G6100901 Fit For |
| Komatsu Engine: D04F Application:Fit For Kobelco Exacavtor: ED150, SK140SRLC, ED150 | 2, 140SR, SK135SRLC-2, SK130-8, SK140-8 |
Replaces OEM Part Numbers
VA32G6100901 • VA32G6100900 • 0445224040 • 32G61-00901 • 32G6100901 • Komatsu • Engine • Application • Kobelco • Exacavtor • ED150 • SK140SRLC
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the common rail assembly may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Komatsu equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Komatsu equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Komatsu D04F?
Yes. This part is designed to fit the Komatsu D04F, SK130-8, SK140-8, SK140SRLC among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference VA32G6100901 with VA32G6100900?
Yes. Both VA32G6100901 and VA32G6100900 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (SK130, SK140, ED150) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
How long does a Komatsu fuel pump typically last?
Fuel pump life varies by application, but on Komatsu equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.


Reviews
There are no reviews yet.