Fuel Injection Pump 7024318 7020462 for JLG 3394RT 4394RT 400S 450A 460SJ 600A 600S 601S 660SJ 800A
This fuel pump is engineered as a direct replacement for the JLG 3394RT 4394RT 400S 450A 460SJ 600A 600S 601S 660SJ 800A. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Injection Pump 7024318 7020462 for JLG 3394RT 4394RT 400S 450A 460SJ 600A 600S 601S 660SJ 800A Condition: New Aftermarket Part Note: We recommend replacing the entire unit pump set to engine’s optimal performance. Because the unit pumps are installed individually for each cylinder, consistent fuel injection volume and timing are crucial. Due to differences in fuel delivery characteristics between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of unit pumps helps avoid potential issues. Replacement Part Number: 7024318, 7020462 Application: Fit for JLG Scissor Lift: 3394RT, 4394RTFit for JLG Boom Lift: 400S, 450A, 450AJ, 460SJ, 600A, 600AJ, 600S, 600SC, 600SJ, 601S, 660SJ, 660SJC, 800A, 800AJ, 800S | See product specifications |
Replaces OEM Part Numbers
7024318 • 7020462 • Application • Scissor • 3394RT • 4394RTFit • 450AJ • 460SJ • 600AJ • 600SC • 600SJ • 660SJ
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injection pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 7024318 with 7020462?
Yes. Both 7024318 and 7020462 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
Reviews
There are no reviews yet.