Fuel Injector 0445110654 02AJ813375 LR073710 for Jaguar XE XF Land Rover Range Rover Velar Vehicle
This fuel injector is engineered as a direct replacement for the Jaguar XE XF Land Rover Range Rover Velar Vehicle. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Injector 0445110654 02AJ813375 LR073710 for Jaguar XE XF Land Rover Range Rover Velar Vehicle Condition: New Aftermarket Part Note: We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues. Always use clean oil. Replacement Part Number:02AJ813375, 0445110653, 0445110654, G4D39K546AA, LR073710 Application:Fit For Following Models:Jaguar XE 2.0 AWD X760 2.0L 134.0 kW 09/2016 | 08/2020 204DTDJaguar XE 20d X760 2.0L 132.0 kW 06/2015-08/2020 204DTDJaguar XF 20d X260 2.0L 132.0 kW 10/2015-08/2020 204DTDJaguar XF 20d AWD X260 2.0L 132.0 kW 03/2016-08/2020 204DTDLand Rover Range Rover Velar D180 AWD LY,L560 2.0L 132.0 kW 08/2017-08/2020 204DTDLand Rover Range Rover Velar D180 AWD LY,L560 2.0L 132.0 kW 08/2017-08/2020 204DTDLand Rover Range Rover Velar D180 AWD LY,L560 2.0L 132.0 kW 08/2017-08/2020 204DTD |
Replaces OEM Part Numbers
02AJ813375 • 0445110653 • 0445110654 • G4D39K546AA • LR073710 • Application • Following • Models • Jaguar • 134.0 • 2016-08 • 204DTDJaguar
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Can I cross-reference 02AJ813375 with 0445110653?
Yes. Both 02AJ813375 and 0445110653 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
Reviews
There are no reviews yet.