Fuel Injector 76041023044 for KTM 690 SMC Enduro R Duke Husqvarna Svartpilen Vitpilen 701
This fuel injector is engineered as a direct replacement for the KTM 690 SMC Enduro R Duke Husqvarna Svartpilen Vitpilen 701. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Injector 76041023044 for KTM 690 SMC Enduro R Duke Husqvarna Svartpilen Vitpilen 701 Condition: New Aftermarket Part Note: We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues. Replacement Part Number: 76041023044 Applications: Fit for following models: KTM Motorcycle: 690 SMC R 2019 | 2023 690 Duke, white 2018 690 Duke, orange 2018-2019 690 Enduro R 2017-2023 690 Duke ORANGE 2017 690 Duke WHITE 2017 690 Duke ORANGE ABS 2016 690 Enduro R ABS 2014-2016 690 Duke BLACK ABS 2013-2015 690 Duke WHITE ABS 2013-2016 Husqvarna Motorcycle: 701 Enduro LR 2020 Svartpilen 701 2019-2020 Vitpilen 701 2018-2020 701 Enduro 2016-2023 701 Supermoto 2016-2023 GAS GAS Motorcycle: ES 700 2022-2023SM 700 2022-2023 |
Replaces OEM Part Numbers
76041023044
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Does this replace OEM number 76041023044?
Yes. This is a direct aftermarket replacement for 76041023044. It matches the original dimensions, connector type, and operating specifications. No modifications to your vehicle or equipment are required.
My vehicle is a 2019 model – is it covered?
The compatibility range for this part includes 2019-2023. The 2019 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.