Fuel Injector A640070128780 0986435189 0445110378 for Mercedes-Benz A160 A180 A200 B180 B200
This fuel injector is engineered as a direct replacement for the Mercedes-Benz A160 A180 A200 B180 B200. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Mercedes | Benz Vehicle:A-Class W169/W176 A 160 CDI 2004/04 – 2012/06A-Class W169/W176 A 180 CDI 2004/04 – 2012/06A-Class W169/W176 A 200 CDI 2004/04 – 2012/06B-Class Sports Tourer W245/W246 B 180 CDI 2005/03 – 2011/11B-Class Sports Tourer W245/W246 B 200 CDI 2005/03 – 2011/11 |
Replaces OEM Part Numbers
A640070128780 • A6400701287 • 6400701287 • 64007012870 • 0986435189 • 0445110378 • 0445110377
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my Mercedes A160?
Yes. This part is designed to fit the Mercedes A160, A180, A200, B180 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference A640070128780 with A6400701287?
Yes. Both A640070128780 and A6400701287 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
What are the common failure signs on a Mercedes engine?
On Mercedes engines, watch for black exhaust smoke under load, rough idle, misfire codes (P0300 series), and loss of power. A single failing injector can reduce engine output by up to 25%. If you notice fuel in the engine oil, the injector seat seal is likely compromised.
What tools do I need to install this on a Mercedes?
Standard metric hand tools will handle most of the job – sockets, wrenches, and a torque wrench. For Mercedes equipment, check the specific service manual for any special tools or torque values.
Reviews
There are no reviews yet.