Fuel Injector AR89564 for John Deere Tractor 2955 2350 2030 2020 1140 1530 27333 1520
This fuel injector is engineered as a direct replacement for the John Deere Tractor 2955 2350 2030 2020 1140 1530 27333 1520. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| 4 Fuel Injectors AR89564 for John Deere Engine 3164D 3179 3179DF 3179TF 4039 4180 4202 4219 4239 Tractor 2955 2350 2030 2020 1140 1530 27333 1520 Condition:New Aftermarket Part Note:We recommend replacing the entire set of fuel injectors to ensure the engine’s optimal performance. Due to differences in oil output and atomization concentration between genuine and aftermarket parts, they should not be mixed. Replacing the entire set of injectors helps avoid potential issues. Replace Part Number:AR89564, AR49877, AR73673, AR88236, AR88239, AR89563, SE500822, SE501099, 27333 Fit For John Deere Engine:5.9, 4180, 4202, 4219, 4239, 6359, 4219DF, 4239D, 4239DF, 4239DT004, 4239T, 4239TF, 4329A(3.9L), 5.9L, 6329D, 6329DZ02, 6359D, 6359DC01, 6359DF001, 6359T, 6359TF001, CD3179DF, CD3179TF, 2.9 L, 2.9L, 3.9 L, 3.9L, 3164D, 3179, 3179DF, 3179TF, 4039, 4039DT004, DZ05DZ01, 6329DZ02DZ07, 6359DC01 Applications:Fit For John Deere Tractor:300, 301, 302, 350, 400, 401, 820, 830, 840, 920, 930, 940, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 2120, 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2650, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3135, 3140, 3150, 3152, 3155, 3255, 3350, 3640, 4030, 1030OU, 1030VU, 1035EF, 1035EV, 1040V, 1140F, 1140V, 1445F, 1630OU, 1630VU, 1635EF, 1635EV, 1640F, 1745F, 1750V, 1840F, 1845F, 1850F, 1850N, 1850V, 1950F, 2030OU, 2035EF, 2040F, 2040S, 2250F, 2345F, 2355N, 2450F, 2650F, 300B, 301A, 302A, 350B, 401D, 930VU, 940V, JD300, JD301, JD400, JD401 | See product specifications |
Replaces OEM Part Numbers
AR89564 • AR49877 • AR73673 • AR88236 • AR88239 • AR89563 • SE500822 • SE501099 • 27333 • Deere • Engine • 4219DF
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injectors & nozzle may be the cause:
- Rough idle or misfire — Uneven fuel delivery from a worn injector causes the engine to shake at idle. On John Deere engines, this is often accompanied by a knocking sound under load.
- Black or white exhaust smoke — Black smoke means excess fuel; white smoke indicates incomplete combustion. Both point to injector spray pattern degradation.
- Loss of engine power — A single failing injector reduces cylinder output. Multi-cylinder engines lose noticeable power when one injector flows less than the rest.
- Increased fuel consumption — Poor atomization means the engine burns more fuel to produce the same power. Monitor your fuel burn rate as an early warning sign.
- Hard starting or no start — If the injector doesn’t deliver fuel on cranking, the cylinder won’t fire. This is especially common in cold weather with worn nozzles.
- Fuel in engine oil (dilution) — Fuel leaking past the injector seat seal contaminates the crankcase oil. If the oil level rises or smells of diesel, inspect the injectors immediately.
Replace as a Set
Replace all injectors as a set whenever possible. On John Deere engines, mixing old and new injectors creates uneven fuel delivery — the new injectors compensate for the worn ones, shortening their life. When installing, use new copper sealing washers and torque to the specification in the service manual. After installation, run the engine at idle for 5 minutes to bleed air from the fuel system, then check for leaks at each injector connection before putting the machine under load.
Frequently Asked Questions
Will this fit my John Deere 2955?
Yes. This part is designed to fit the John Deere 2955, 2350, 2030, 2020 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference AR89564 with AR49877?
Yes. Both AR89564 and AR49877 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (JD300, JD301, JD400, JD401) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
What are the common failure signs on a John Deere engine?
On John Deere engines, watch for black exhaust smoke under load, rough idle, misfire codes (P0300 series), and loss of power. A single failing injector can reduce engine output by up to 25%. If you notice fuel in the engine oil, the injector seat seal is likely compromised.
Reviews
There are no reviews yet.