Fuel Pump 403901806 403901802 for Ski-Doo Snowmobile MX Z Summit 500 600 700 800
This fuel pump is engineered as a direct replacement for the Ski-Doo Snowmobile MX Z Summit 500 600 700 800. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Pump 403901806 403901802 for Ski | Doo Snowmobile MX Z Summit 500 600 700 800 Replacement Part Number: 403901806, 403901802 Applications:Fit For Ski-Doo Snowmobile:2003: MX Z 500 Trail, MX Z 600 Sport, MX Z 600 Trail, MX Z 600 X, MX Z 700 Adrenaline, MX Z 800 X, Summit 600 Adrenaline, Summit 700 Highmark, 2002: MX Z 500 Trail, MX Z 600 Trail, MX Z 700 Trail, MX Z 800 Trail, Summit 600 Sport, Summit 700 Sport, Summit 800 Sport2001: MX Z 800, Summit 600, Summit 700, Summit 800 |
Replaces OEM Part Numbers
403901806 • 403901802
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 403901806 with 403901802?
Yes. Both 403901806 and 403901802 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
Reviews
There are no reviews yet.