Fuel Pump Kit 892267A51 898101T67 for Mercury Outboard 25 30 40 50 60 EFI
This fuel pump is engineered as a direct replacement for the Mercury Outboard 25 30 40 50 60 EFI. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Pump Kit 892267A51 898101T67 for Mercury Outboard 25 30 40 50 60 EFI Replacement Part Number: 892267A51, 898101T67 Applications:Fit for Mercury Outboard: 25 EFI, 25 Jet EFI, 30 EFI, 40 EFI, 50 EFI, 60 EFI, Formula 60 See Details: 25 EFI (3 CYL.)(4 | STROKE) – 0R106999 & Up25 Jet EFI (3 CYL.)(4-STROKE) – 0R165086 & Up30 EFI (3 CYL.)(4-STROKE) – 0P153500 THRU 0P40099930 EFI (3 CYL.)(4-STROKE) – 0R106999 & Up30 EFI (3 CYL.)(4-STROKE) – 0T409000 THRU 1B22699930 EFI (3 CYL.)(4-STROKE) – 1C109093 & Up40 EFI (3 CYL.)(4-STROKE) – 0P153500 THRU 0P40099940 EFI (3 CYL.)(4-STROKE) – 0P401000 THRU 0P51589640 EFI (3 CYL.)(4-STROKE) – 0T409000 THRU 1B22699940 EFI (3 CYL.)(4-STROKE) – 1B227000 THRU 1B34439840 EFI (3 CYL.)(4-STROKE) – 1C000001 THRU 1C04341640 EFI (3 CYL.)(4-STROKE) – 1C043417 & Up40 EFI (4 CYL.)(4-STROKE) – 0P153500 THRU 0P40099940 EFI (4 CYL.)(4-STROKE) – 0P401000 THRU 0P51589640 EFI (4 CYL.)(4-STROKE) – 0P515897 & Up40 EFI (4 CYL.)(4-STROKE) – 0T409000 THRU 1B34430640 EFI (4 CYL.)(4-STROKE) – 1C000001 THRU 1C05025140 EFI (4 CYL.)(4-STROKE) – 1C050252 & Up40 EFI (4 CYL.)(4-STROKE)(JET) – 1C051324 & Up50 EFI (4 CYL.)(4-STROKE) – 0P401000 THRU 0P51589650 EFI (4 CYL.)(4-STROKE) – 0P515897 & Up50 EFI (4 CYL.)(4-STROKE) – 0T409000 THRU 1B34430650 EFI (4 CYL.)(4-STROKE) – 1C000001 THRU 1C05025150 EFI (4 CYL.)(4-STROKE) – 1C050252 & Up60 EFI (4 CYL.)(4-STROKE) – 0P153500 THRU 0P40099960 EFI (4 CYL.)(4-STROKE) – 0P401000 THRU 0P51589660 EFI (4 CYL.)(4-STROKE) – 0P515897 & Up60 EFI (4 CYL.)(4-STROKE) – 0T409000 THRU 1B34430660 EFI (4 CYL.)(4-STROKE) – 1C000001 THRU 1C05025160 EFI (4 CYL.)(4-STROKE) – 1C050252 & UpFormula 60 – 1C104574 & Up |
Replaces OEM Part Numbers
892267A51 • 898101T67
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 892267A51 with 898101T67?
Yes. Both 892267A51 and 898101T67 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
Reviews
There are no reviews yet.