High & Low Pressure Dual Fuel Pump 6P2-13907-00-00 63P-13906-00-00 for Yamaha Outboard F200 F250 F350 2006-2012
This fuel pump is engineered as a direct replacement for the Yamaha Outboard F200 F250 F350 2006-2012. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| High & Low Pressure Dual Fuel Pump 6P2 | 13907-00-00 63P-13906-00-00 for Yamaha Outboard F200 F250 F350 2006-2012 Replacement Part Number: 6P2-13907-00-00-1, 6P2-13907-00-00, 63P-13906-00-00, 69J-24410-00-00, HFP-CPN7, 6P21390700001, 6P2139070000, 63P139060000, 69J244100000, HFPCPN7 Application: Fit for Yamaha Outboard: 2006-2011 F2002005 F250TURD2005 F250TXRD2005 LF250TURD2005 LF250TXRD2006-2012 F200LB2006-2012 F200XA2006-2012 F200XB2006-2012 F200XCA2006-2012 F225TLR2006-2012 F225XA2006-2012 F250BTUR2006-2012 F250BTXR2006-2012 F250TUR2006-2012 F250TXR2006-2012 F250UA2006-2012 F250XA2006-2012 LF200XA2006-2012 LF200XB2006-2012 LF200XCA2006-2012 LF225XA2006-2012 LF250BTUR2006-2012 LF250BTXR2006-2012 LF250TUR2006-2012 LF250TXR2006-2012 LF250UA2006-2012 LF250XA2006-2011 F3502017-2019 4 Cyl 4 Stroke 2.8L 1502014-2019 4 Cyl 4 Stroke 2.8L 1752012-2019 4 Cyl 4 Stroke 2.8L 2002007-2018 6 Cyl 4 Stroke 3.3L 2252005-2010 6 Cyl 4 Stroke 3.3L 2502007-2009 8 Cyl 4 Stroke 5.3L 3002007-2011 8 Cyl 4 Stroke 5.3L 350 |
Replaces OEM Part Numbers
6P2-13907-00-00-1 • 6P2-13907-00-00 • 63P-13906-00-00 • 69J-24410-00-00 • HFP-CPN7 • 6P21390700001 • 6P2139070000 • 63P139060000 • 69J244100000 • HFPCPN7 • Application • Yamaha
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 6P2-13907-00-00-1 with 6P2-13907-00-00?
Yes. Both 6P2-13907-00-00-1 and 6P2-13907-00-00 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My vehicle is a 2006 model – is it covered?
The compatibility range for this part includes 2006-2012. The 2006 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.