VP44 Fuel Injection Pump for Cummins Engine 5.9L 029 Mid-range
This fuel pump is engineered as a direct replacement for the Cummins Engine 5.9L 029 Mid-range. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Cummins Engine 5.9L 6BTA5.9L QSB5.9 | See product specifications |
| Cummins Engine: 5.9L, 6BTA 5.9L, QSB 5.9 Application: Fit for | See product specifications |
| Dodge Vehicle: Ram 2500 2001 | 2002Ram 3500 2001-2002 |
Replaces OEM Part Numbers
3937167 • 3937672 • 3943506 • 3944983 • 3944983RX • 3964555 • 3964555RX • 3944893 • 3941160 • 3676671 • 3942084 • 3943162
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injection pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Cummins equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Cummins equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Cummins 029?
Yes. This part is designed to fit the Cummins 029 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 3937167 with 3937672?
Yes. Both 3937167 and 3937672 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
My engine code is VP44 with a 5.9L displacement – is this the right part?
Yes. Engine code VP44 with 5.9L displacement is within the supported range for this part. The full list of compatible engine codes includes: VP44. Confirm your engine code on the data plate attached to the engine block.
My vehicle is a 2001 model – is it covered?
The compatibility range for this part includes 2001-2002. The 2001 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.
Reviews
There are no reviews yet.