Fuel Injection Pump 719946-51390 for Yanmar Engine 3TNV82A-DSA 3TNV82A-GAGR 3TNV82A-GEU 3TNV82A-GGE 3TNV82A-GGEC 3TNV82A-GKL 3TNV82A-GMG

Fuel Injection Pump 719946-51390 for Yanmar Engine 3TNV82A-DSA 3TNV82A-GAGR 3TNV82A-GEU 3TNV82A-GGE 3TNV82A-GGEC 3TNV82A-GKL 3TNV82A-GMG

This fuel pump is engineered as a direct replacement for the Yanmar Engine 3TNV82A-DSA 3TNV82A-GAGR 3TNV82A-GEU 3TNV82A-GGE 3TNV82A-GGEC 3TNV82A-GKL 3TNV82A-GMG. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.

Vehicle Compatibility

Replaces OEM Part Numbers

719946-51390 • 71994651390 • Yanmar • Engine • 3TNV82A-DSA • 3TNV82A-DSA2 • 3TNV82A-DSA3 • 3TNV82A-GAGR • 3TNV82A-GEU • 3TNV82A-GGE • 3TNV82A-GGEC • 3TNV82A-GGECA

Signs You Need a Replacement

If your equipment is showing any of these symptoms, the injection pump may be the cause:

• Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
• Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
• Fuel pressure warning (if equipped) — Modern Yanmar equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
• Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
• Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
• Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.

Before You Replace the Pump

Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Yanmar equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.

Frequently Asked Questions

Which Yanmar models does this part fit?
Refer to the Vehicle Compatibility table above for the full list of Yanmar models. Each listing includes the body type, engine, and production years. Match your vehicle’s engine code (stamped on the engine block) against the listed codes to confirm.

Can I cross-reference 719946-51390 with 71994651390?
Yes. Both 719946-51390 and 71994651390 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.

My vehicle is a 9946 model – is it covered?
The compatibility range for this part includes 9946-5139. The 9946 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.

How long does a Yanmar fuel pump typically last?
Fuel pump life varies by application, but on Yanmar equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.

You May Also Need