Fuel Pump 7249380 for Bobcat E32 E35 E42 E45 E50 E55 E85 S450 S510 S530 S550 S570 S590 S595 S630 S650 T450 T550 T590 T595 T630 T650
This fuel pump is engineered as a direct replacement for the Bobcat E32 E35 E42 E45 E50 E55 E85 S450 S510 S530 S550 S570 S590 S595 S630 S650 T450 T550 T590 T595 T630 T650. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Bobcat E32 E35 E42 E45 E50 E55 E85 S450 S510 S530 S550 S570 S590 S595 S630 S650 T450 T550 T590 T595 T630 T650 Condition: Remanufactured Replace Part Number: 7249380, 7030405 Applications:Fit for following models | See product specifications |
| Bobcat Excavator: E32, E35, E42, E45, E50, E55, E85 | See product specifications |
| Bobcat Toolcat Work Machine: 5600, 5610 | See product specifications |
| Bobcat Skid Steer Loader: S450, S510, S530, S550, S570, S590, S595, S630, S650 | See product specifications |
| Bobcat Track Loader: T450, T550, T590, T595, T630, T650 | See product specifications |
Replaces OEM Part Numbers
7249380 • 7030405
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the injection pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Bobcat equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Bobcat equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Bobcat E32?
Yes. This part is designed to fit the Bobcat E32, E35, E42, E45 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 7249380 with 7030405?
Yes. Both 7249380 and 7030405 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How long does a Bobcat fuel pump typically last?
Fuel pump life varies by application, but on Bobcat equipment you can generally expect 5,000 to 10,000 hours of operation. Running the tank dry, using contaminated fuel, or neglecting the fuel filter are the top causes of premature failure.
What tools do I need to install this on a Bobcat?
Standard metric hand tools will handle most of the job – sockets, wrenches, and a torque wrench. For Bobcat equipment, check the specific service manual for any special tools or torque values.
Reviews
There are no reviews yet.