Fuel Pump Assembly 49040-0026 for Kawasaki ER-6N Versys Ninja 650 650R 2006-2014
This fuel pump is engineered as a direct replacement for the Kawasaki ER-6N Versys Ninja 650 650R 2006-2014. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Pump Assembly 49040 | 0026 for Kawasaki Motorcycle ER-6N Versys Ninja 650 650R 2006-2014 Replacement Part Number: 49040-0026, 490400026 Application:Fit for Following Models:Kawasaki ER-6N 2009-2010Kawasaki Ninja 650 EX650 2006-2011Kawasaki Ninja 650 EX650E 2012-2014Kawasaki Ninja 650 EX650F ABS 2013-2014Kawasaki Ninja 650R EX650A 2006-2007Kawasaki Ninja 650R EX650J 2008Kawasaki Ninja 650R EX650C 2009-2011Kawasaki Versys 650 KLE650A 2007-2009Kawasaki Versys 650 KLE650C 2010-2014Kawasaki Versys 650 KLE650D ABS 2014 |
Replaces OEM Part Numbers
49040-0026 • 490400026 • Application • Following • Models • Kawasaki • ER-6N • 2009-2010Kawasaki • Ninja • EX650 • 2006-2011Kawasaki • EX650E
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern Kawasaki equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on Kawasaki equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Will this fit my Kawasaki 650?
Yes. This part is designed to fit the Kawasaki 650, 650R among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 49040-0026 with 490400026?
Yes. Both 49040-0026 and 490400026 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (EX650, EX650E, EX650F, EX650A) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
My vehicle is a 9040 model – is it covered?
The compatibility range for this part includes 9040-0026. The 9040 model year falls within this range, but verify the engine code and body type match. Mid-year production changes sometimes mean two vehicles from the same model year use different parts.




Reviews
There are no reviews yet.