Fuel Pump Assembly 66M-24410-11-00 for Yamaha Outboard 4-Stroke 9.9HP 15HP F15 F9.9
This fuel pump is engineered as a direct replacement for the Yamaha Outboard 4-Stroke 9.9HP 15HP F15 F9.9. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Fuel Pump Assembly 66M | 24410-11-00 for Yamaha Outboard 4-Stroke 9.9HP 15HP F15 F9.9 Replace Part Number:66M-24410-11-00,66M244101100,66M-24410-10-00,66M244101000 Application:Fit for follwing models:Yamaha Outboard 9.9HP F9.9MLH2K 2006Yamaha Outboard 15HP F15PLH 2006Yamaha Outboard 9.9HP F9.9ELR2K 2006Yamaha Outboard 9.9HP T9.9EXH2K 2006Yamaha Outboard 15HP F15PLR 2006Yamaha Outboard 9.9HP F9.9MSH2K 2006Yamaha Outboard 9.9HP T9.9ELR2K 2006Yamaha Outboard 9.9HP T9.9ELH2K 20062002 F15ELHA2002 F15ESHA2002 F15MLHA2002 F15MSHA2002 F15MSHAG2002 F15PLHA2002 F15PLRA2003 F15ELHB2003 F15ELHBH2003 F15ESHB2003 F15MLHB2003 F15MSHB2003 F15PLHB2003 F15PLRB2004 F15ELHC2004 F15ESHC2004 F15MLHC2004 F15MSHC2004 F15PLHC2004 F15PLRC2005 F15ELHD2005 F15ESHD2005 F15MLHD2005 F15MSHD2005 F15MSHDZ2005 F15PLHD2005 F15PLRD2005 F9.9ELR2D2005 F9.9MLH2D2005 F9.9MSH2D2005 T9.9ELH2D2005 T9.9ELR2D2005 T9.9EXH2D2006 and Later F15ELH2006 and Later F15ELHK2006 and Later F15ESH2006 and Later F15ESHK2006 and Later F15MLH2006 and Later F15MLHK2006 and Later F15MSH2006 and Later F15MSHK2006 and Later F15PLH2006 and Later F15PLHK2006 and Later F15PLR2006 and Later F15PLRK2006 and Later F9.9ELR22006 and Later F9.9MLH22006 and Later F9.9MSH22006 and Later T9.9ELH22006 and Later T9.9ELR22006 and Later T9.9ELR2U2006 and Later T9.9ELR2K2006 and Later T9.9EXH22006 and Later T9.9EXH2K |
Replaces OEM Part Numbers
66M-24410-11-00 • 66M244101100 • 66M-24410-10-00 • 66M244101000 • Application • follwing • models • Yamaha • Outboard • 9.9HP • F9.9MLH2K • 2006Yamaha
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel pump may be the cause:
- Engine cranks but won’t start — The pump may have lost prime or stopped delivering fuel. Check for fuel at the filter outlet before replacing the pump.
- Stalling under load — A weak pump can’t maintain pressure at high demand. The engine runs fine at idle but dies when you put it to work.
- Fuel pressure warning (if equipped) — Modern equipment monitors fuel rail pressure. A low-pressure warning often means the pump is failing.
- Loud whining from fuel system — A failing pump makes a high-pitched whine that gets louder as it warms up. Normal pump noise is a low hum.
- Air in fuel lines — If you see bubbles in the transparent fuel line or the primer bulb won’t stay firm, the pump may be drawing air through a worn seal.
- Excessive return flow — Too much fuel returning to the tank instead of reaching the injectors indicates internal pump wear.
Before You Replace the Pump
Before replacing the pump, check the fuel filter and fuel lines for restrictions. A blocked filter causes the same symptoms as a failing pump on equipment. When installing the new pump, fill it with clean fuel before connecting the lines — this reduces priming time and prevents dry-run damage. After installation, bleed the system fully and check for leaks at all connection points. Replace the fuel filter at the same time as the pump to protect the new unit from debris.
Frequently Asked Questions
Can I cross-reference 66M-24410-11-00 with 66M244101100?
Yes. Both 66M-24410-11-00 and 66M244101100 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
Reviews
There are no reviews yet.