Gas Tank Joint Filter with Fuel Line 16955-ZE1-000 16955ZE1000 for Honda GX110 GX120 GX140 GX160 GX200 GX240 GX270 GX340 GX390 Engine
This fuel line is engineered as a direct replacement for the Honda GX110 GX120 GX140 GX160 GX200 GX240 GX270 GX340 GX390 Engine. Manufactured to meet or exceed OEM specifications, it delivers reliable performance in demanding conditions. Each unit is tested for fuel flow, pressure rating, and durability before leaving the factory to ensure consistent quality across every order.
Vehicle Compatibility
| Application | Details |
|---|---|
| Honda GX110 GX120 GX140 GX160 GX200 GX240 GX270 GX340 GX390 Engine Part Number:16955 | ZE1-000, 16955-ZE1-010, 91353671003, 9500202080, 16955ZE1000 16955ZE1010 Content:3*Gas Tank Joint Filter1*Fuel Line2*Fuel Line Clamp Engine |
| Honda GX110, GX120, GX140, GX160, GX200, GX240, GX270, GX340, GX390 Applications | See product specifications |
| Honda Generator: EG2500X | See product specifications |
Replaces OEM Part Numbers
16955-ZE1-000 • 16955-ZE1-010 • 91353671003 • 9500202080 • 16955ZE1000 • 16955ZE1010 • Content • Joint • Filter1 • Line2 • Clamp • Engine
Signs You Need a Replacement
If your equipment is showing any of these symptoms, the fuel line may be the cause:
- Fuel smell or visible wet spots — A cracked or perished fuel line seeps fuel. Diesel fuel lines harden with age and develop hairline cracks near connection points.
- Air in the fuel system — Air enters through deteriorated hoses, causing hard starting and rough running. Check all connections and replace any line that feels spongy.
- Collapsed line under suction — A reinforced fuel line can collapse internally, restricting flow. The engine runs fine at idle but starves under load.
- Fuel leaking at connection points — Old clamps lose tension and the hose shrinks over time. Always use new clamps when installing fuel lines.
Installation Tips
When installing new fuel lines, cut the ends square with a sharp blade — angled cuts cause leaks at the connection points. Use new clamps at every connection; old clamps have lost their spring tension. After installation, pressurize the system with the primer pump and check every fitting for dampness. Run the engine and recheck after 10 minutes of operation, as fittings can loosen slightly under vibration.
Frequently Asked Questions
Will this fit my Honda GX110?
Yes. This part is designed to fit the Honda GX110, GX120, GX140, GX160 among other models listed in the compatibility table above. Verify your specific model and engine code before ordering to ensure the correct fit.
Can I cross-reference 16955-ZE1-000 with 16955-ZE1-010?
Yes. Both 16955-ZE1-000 and 16955-ZE1-010 are interchangeable OEM numbers for this part. They refer to the same component with the same specifications, just different part number revisions.
How do I check if my engine code (GX110, GX120, GX140, GX160) matches?
The engine code is stamped on a metal tag attached to the engine block, usually near the timing belt cover or on the cylinder head. Compare the code you find with the list above. Engine codes are 3 to 6 characters long.
What material are these fuel lines made from?
This fuel line kit uses materials rated for the specific fuel type and pressure of your application. Diesel lines need to handle higher pressure than gasoline lines. Always install the correct fuel-rated line and use new clamps at every connection point.


Reviews
There are no reviews yet.